Pipe Conveyor Belt
Performance:
Pipe conveyor belt is different from traditional conveyor belt in its design and splicing aspect and solve many conveying problems, such as spillage of materials, limitations with regard to steep incline and curve layout. It’s widely used for conveying materials such as mining, iron ore, power, alumina, coal construction, etc.
CHARACTERISTICS
WE CAN OFFER
1
Characteristics
1. High speed and stable conveying.
2. Excellent flexibility, fatigue resistant, abrasion resistant.
3. Preventing pollution and eco-friendly, no dust.
4. Large angle of inclination, reverse conveying.
5. Easy layout and easy maintenance.
6. Long working time.
2
Classification of Rubber Lining
By different basic strength materials used in belt, we can offer:
1.Fabric pipe conveyor belt
2.Steel cord pipe conveyor belt
Fabric Pipe Conveyor Belt
Belt width and corresponding pipe diameter specification: unit(mm)
Normal Diameter mm | 100 | 150 | 200 | 250 | 300 |
350 | 400 | 500 | 600 | 700 | 800 | 850 | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Belt Width mm | 360 | 550 | 730 | 910 | 1100 | 1280 | 1460 | 1820 | 2190 | 2550 | 2900 | 3100 |
Cover Rubber Quality
Performance class of cover rubber | Tensile Strength Mpa≥ | Elongation at break %≥ | Abrasionmm3≤ | Ozone Resistant | The tensile strength and elongation at break’s change rate after aging % | ||
---|---|---|---|---|---|---|---|
D | 18.0 | 400 | 90 | No cracking | -25 ~ +25 | ||
H | 24.0 | 450 | 120 | No cracking | -25 ~ +25 | ||
T1、T2 | 10.0 | 300 | 200 | __ | -45 ~ +45 |
A. Ozone resistant test condition: concentration(50±5)*10-8 (volume fraction ), temperature (40±2)℃, elongation(20±2)%, time 96h.
B. Hot air ageing test condition: D and H type pipe conveying belt 70℃* 168 h: T 1 type pipe conveying belt 100℃* 168h:T2 type pipe conveying belt 125℃ * 168h.
Note:D—High Abrasion; H—anti-tear; T1—Heat Resistant under 100℃ ; T2 High Resistant under125℃. |
---|
The Type D and Type H belt should meet the requirement of the table below:
Item | Ply to PlyN/mm | Transition part to PlyN/mm | Cover rubber to ply N/mm | |
---|---|---|---|---|
Thickness of cover | Thickness of cover | |||
Maximum value of allsamples | 20 | 20 | 20 | 20 |
Average value of allsamples | 8.0 | 8.7 | 5.0 | 6.0 |
Minimum value of allsamples | 7.4 | 7.4 | 4.4 | 5.4 |
Steel Cord Pipe Conveyor Belt
Diameter of steel cord pipe conveyor belt
Nominal diameter mm | Φ250 | Φ300 | Φ350 | Φ400 | Φ500 | Φ600 | Φ700 | 500 | |
---|---|---|---|---|---|---|---|---|---|
Belt Width mm | 910 | 1100 | 1280 | 1460 | 1820 | 2190 | 2550 | 1820 |
Steel cord pipe conveyor belt tensile strength and belt width specification
Belt width | Number of steel cord | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
mm | St630 | St800 | St1000 | St1250 | St1600 | St2000 | St2500 | St2800 | St3150 | St3500 | St4000 | St4500 | St5000 |
800 | 75 | 75 | 63 | 63 | 63 | 63 | 64 | 50 | 50 | 50 | 50 | ||
1000 | 95 | 95 | 79 | 79 | 79 | 79 | 69 | 64 | 64 | 64 | 64 | 59 | 55 |
1100 | 105 | 105 | 87 | 87 | 87 | 87 | 69 | 69 | 69 | 69 | 69 | 65 | 61 |
1300 | 124 | 124 | 103 | 103 | 103 | 103 | 83 | 83 | 83 | 83 | 83 | 77 | 72 |
1600 | 151 | 151 | 126 | 126 | 126 | 126 | 101 | 101 | 101 | 104 | 104 | 96 | 90 |
1850 | 177 | 177 | 147 | 147 | 147 | 147 | 119 | 119 | 119 | 119 | 119 | 111 | 104 |
2250 | 181 | 181 | 181 | 181 | 145 | 145 | 145 | 145 | 145 | 137 | 125 | ||
2450 | 197 | 197 | 197 | 197 | 158 | 158 | 158 | 158 | 158 | 148 | 139 |
Cover Rubber Quality:
Performance class of cover rubber | Tensile Strength Mpa≥ | Elongation at break %≥ | Abrasionmm3≤ | Ozone Resistant | The tensile strength and elongation at break’s change rate after aging % | ||
---|---|---|---|---|---|---|---|
D | 18.0 | 400 | 90 | No cracking | -25 ~ +25 | ||
H | 24.0 | 450 | 120 | No cracking | -25 ~ +25 | ||
T1、T2 | 10.0 | 300 | 200 | __ | -45 ~ +45 | ||
Note: H— High Anti-tear; D—High Abrasion; L—Moderate abrasion. | |||||||
A. Ozone resistant test condition: concentration(50±5)* 10-8 (volume fraction ), temperature(40±2)℃, elongation (20±2)%, time 96h.B. Hot air ageing test condition: 70℃* 168h. |
RELATED PRODUCTS
GET IN TOUCH